Minelab CTX3030 17" Coil Yoke Stiffener
The CTX3030 coil yoke stiffeners will make your coils less prone to breaking by reinforcing the existing yoke plates.
If your yoke tab breaks off, you can use this part to repair the coil using two cable ties to hold the yoke plate in position securely.
This is for anyone who has a broken yoke already and uses 2 cable ties to fix the repair plate in place. To fit simple, disassemble the coil from the steam and put the repair plate in place, and secure around the coil body with 2 off x 5 mm cable ties. Reassemble the coil back onto the shaft placing the broken yoke tab in place to get the right spacing.
* Coil Not Inluded