Minelab Equinox 800 - 600 Coil Yoke Stiffener For 6 '' Coils

Minelab Equinox 800 - 600 Coil Yoke Stiffener and Repair Yoke - Colour will be black The NOX 600 and 800 coil yoke stiffeners will make your coils less prone to breaking by reinforcing the existing yoke plates.

There are to versions available one for the 11- and 15-inch coil and one for the 6-inch coil.

Also available is the repair yoke for the 11- and 15-inch coil.

If your yoke tab breaks off, you can use this part to repair the coil using two cable ties to hold the yoke plate in position securely.

This is for anyone who has a broken yoke already and uses 2 cable ties to fix the repair plate in place.

To fit simple, disassemble the coil from the steam and put the repair plate in place, and secure around the coil body with 2 off x 5 mm cable ties.

Reassemble the coil back onto the shaft placing the broken yoke tab in place to get the right spacing.

* Coil Not Included *